Modeling and Checking the Power Quality of High Pressure Sodium Vapor Lamp

Sadeghian, Ehsan (2018): Modeling and Checking the Power Quality of High Pressure Sodium Vapor Lamp. Published in: International Journal of Advanced Research in Electronics and Communication Engineering (IJARECE) , Vol. 7, No. Issue 3 (March 2018): pp. 232-237.

Abstract

High pressure sodium Vapor lamps due to long service life High Light, as the most comprehensive street lighting and industrial lighting Whose use is increasing day by day. One of the major drawbacks to these lamps is producing a lot of current harmonic. Therefore, check the Power Quality of these lamps becomes necessary. To check the quality of our lamps, it's necessary to express the exact model of these lamps. In this paper, we simulate a high-pressure lamp based on plasma physics equations. With this exact model, the power consumption of these lamps is considered by using THD and the results are compared with the standard values. In this paper, taking into account the magnetic ballast for a high-pressure sodium Vapor lamp, a precise simulation of these lamps was performed using the MATLAB / Simulink software.

• Item Type: MPRA Paper
• Language: English
• Keywords: High pressure sodium Vapor lamps, THD, magnetic ballast, MATLAB
• Subjects: L - Industrial Organization > L6 - Industry Studies: Manufacturing > L68 - Appliances ; Furniture ; Other Consumer Durables; L - Industrial Organization > L7 - Industry Studies: Primary Products and Construction > L71 - Mining, Extraction, and Refining: Hydrocarbon Fuels; L - Industrial Organization > L7 - Industry Studies: Primary Products and Construction > L74 - Construction; L - Industrial Organization > L8 - Industry Studies: Services > L86 - Information and Internet Services ; Computer Software; L - Industrial Organization > L9 - Industry Studies: Transportation and Utilities > L94 - Electric Utilities

References

[1] M. Mohsenizadeh and J. Zhou, "Kinematic Analysis and Simulation of Theo Jansen Mechanism," Lamar University, 2015.

[2] A. F. Bastani, Z. Ahmadi, and D. Damircheli, "A radial basis collocation method for pricing American options under regime-switching jump-diffusion models," Applied Numerical Mathematics, vol. 65, pp. 79-90, 2013.

[3] A. F. Bastani and D. Damircheli, "An adaptive algorithm for solving stochastic multi-point boundary value problems," Numerical Algorithms, vol. 74, pp. 1119-1143, 2017.

[4] N. Fahimi, et al., "Investigating the failures of defected silicon rubber insulators in salt-fog chamber," in Texas Power and Energy Conference (TPEC), 2018 IEEE, 2018, pp. 1-6.

[5] M. A. Baferani, et al., "A novel arrangement for improving three phase saturated-core fault current limiter (SCFCL)," in Texas Power and Energy Conference (TPEC), 2018 IEEE, 2018, pp. 1-6.

[6] M. K. a. S. Ahmed, "Optimal Resilient Defense Strategy Against False Data Injection Attacks on Power System State Estimation," in Innovative Smart Grid Technologies Conference (ISGT), IEEE Power & Energy Society, pp. 1-6, 2018.

[7] M. Khatibi, H. Zargarzadeh, and M. Barzegaran, "Power system dynamic model reduction by means of an iterative SVD-Krylov model reduction method," in Innovative Smart Grid Technologies Conference (ISGT), 2016 IEEE Power & Energy Society, 2016, pp. 1-6.

[8] M. H. R. Koochi, S. Esmaeili, and P. Dehghanian, "Coherency detection and network partitioning supported by wide area measurement system," in Texas Power and Energy Conference (TPEC), 2018 IEEE, 2018, pp. 1-6.

[9] P. Dehghanian, S. Aslan, and P. Dehghanian, "Quantifying power system resilience improvement using network reconfiguration," in IEEE 60th International Midwest Symposium on Circuits and Systems (MWSCAS), 2017, pp. 1-4.

[10] M. T. Andani, et al., "Controller design for voltage-source converter using LQG/LTR," in Texas Power and Energy Conference (TPEC), 2018 IEEE, 2018, pp. 1-6.

[11] V. Nikolić, et al., "Design and state of art of innovative wind turbine systems," Renewable and Sustainable Energy Reviews, vol. 61, pp. 258-265, 2016.

[12] H. Pourgharibshahi, M. Abdolzadeh, and R. Fadaeinedjad, "Verification of computational optimum tilt angles of a photovoltaic module using an experimental photovoltaic system," Environmental Progress & Sustainable Energy, vol. 34, pp. 1156-1165, 2015.

[13] M. Montazeri, H. Pourgharibshahi, and M. Mohammadian, "Static voltage stability analysis of IRAN south-east power system using extended CPF method," in International Power system conference. Tehran-IRAN, 2012.

[14] A. Rouholamini, et al., "Optimal tilt angle determination of photovoltaic panels and comparing of their mathematical model predictions to experimental data in Kerman," in Electrical and Computer Engineering (CCECE), 2013 26th Annual IEEE Canadian Conference on, 2013, pp. 1-4.

[15] K. Yousefpour, S. J. H. Molla, and S. M. Hosseini, "A Dynamic Approach for Distribution System Planning Using Particle Swarm Optimization," International Journal of Control Science and Engineering, vol. 5, pp. 10-17, 2015.

[16] K. Yousefpour, "Placement of Dispersed Generation with the Purpose of Losses Reduction and Voltage Profile Improvement in Distribution Networks Using Particle Swarm Optimization Algorithm," Journal of World’s Electrical Engineering and Technology, vol. 2322, p. 5114, 2014.

[17] M. H. Imani, et al., "Simultaneous presence of wind farm and V2G in security constrained unit commitment problem considering uncertainty of wind generation," in Texas Power and Energy Conference (TPEC), 2018 IEEE, 2018, pp. 1-6.

[18] M. H. Imani, et al., "Running direct load control demand response program in microgrid by considering optimal position of storage unit," in Texas Power and Energy Conference (TPEC), 2018 IEEE, 2018, pp. 1-6.

[19] S. Abbasi, M. Barati, and G. J. Lim, "A parallel sectionalized restoration scheme for resilient smart grid systems," IEEE Transactions on Smart Grid, 2017.

[20] S. Abbasi, M. Barati, and G. Lim, "A Simplified Parallel Power System Restoration for Large-scale Transmission Grids."

[21] F. Rahmani, F. Razaghian, and A. Kashaninia, "High Power Two-Stage Class-AB/J Power Amplifier with High Gain and Efficiency," Journal of Academic and Applied Studies (JAAS), vol. 4, pp. 56-68, 2014.

[22] F. Rahmani, F. Razaghian, and A. Kashaninia, "Novel Approach to Design of a Class-EJ Power Amplifier Using High Power Technology," World Academy of Science, Engineering and Technology, International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, vol. 9, pp. 541-546, 2015.

[23] S. Abbasi, M. Barati, and G. Lim, "A GPP-Based Sectionalization Toward a Fast Power Transmission System Restoration," in International Conference on Applied Human Factors and Ergonomics, 2017, pp. 11-21.

[24] S. Abbasi, M. Barati, and G. Lim, "A multi-objective MPEC model for disaster management of power system restoration," in IIE Annual Conference. Proceedings, 2017, pp. 872-877.

[25] S. Hashemi, M. Montazeri, and M. Nasiri, "The compensation of actuator delay for hardware-in-the-loop simulation of a jet engine fuel control unit," Simulation, vol. 90, pp. 745-755, 2014.

[26] B. Rahmani and S. R. Hashemi, "Internet-based control of FCU hardware-in-the-loop simulators," Simulation Modelling Practice and Theory, vol. 56, pp. 69-81, 2015.

[27] S. R. Hashemi and M. Montazeri-Gh, "Polynomial-based time-delay compensation for hardware-in-the-loop simulation of a jet engine fuel control unit," International Journal of Automation and Control, vol. 8, pp. 323-338, 2014.

[28] A. Gharib, et al., "Control of Throttle Valve in Idle Speed condition," in Modelling, Identification and Control (ICMIC), The 2010 International Conference on, 2010, pp. 394-399.

[29] S. A. S. Mousavi, et al., "Characteristics that make dynamic systems difficult for a human to control," in American Control Conference (ACC), 2016, 2016, pp. 4391-4396.

[30] F. Matveeva, et al., "On the effects of changing reference command as humans learn to control dynamic systems," in Decision and Control (CDC), 2016 IEEE 55th Conference on, 2016, pp. 1211-1216.

[31] L. Ghorbanzadeh, et al., "Development of a synthetic adaptive neuro-fuzzy prediction model for tumor motion tracking in external radiotherapy by evaluating various data clustering algorithms," Technology in cancer research & treatment, vol. 15, pp. 334-347, 2016.

[32] L. Ghorbanzadeh and A. E. Torshabi, "An Investigation into the Performance of Adaptive Neuro-Fuzzy Inference System for Brain Tumor Delineation Using ExpectationMaximization Cluster Method; a Feasibility Study," Frontiers in Biomedical Technologies, vol. 3, pp. 8-19, 2017.

[33] M. Moavenian, et al., "Control of human hand considering uncertainties," in Advanced Mechatronic Systems (ICAMechS), 2011 International Conference on, 2011, pp. 17-22.

[34] M. Gharib, et al., "Robust controller design with QFT and sliding mode for boiler pressure," in Modelling, Identification and Control (ICMIC), The 2010 International Conference on, 2010, pp. 412-417.

[35] T. Pourseif, et al., "Model Reference Adaptive Control for Robot Tracking Problem: Design & Performance Analysis," International Journal of Control Science and Engineering, vol. 7, pp. 18-23, 2017.

[36] M. T. Andani and Z. Ramezani, "Robust Control of a Spherical Mobile Robot," 2017.

[37] M. Abbaspour and A. H. Jahanikia, "Power quality consideration in the widespread use of compact fluorescent lamps," in Electrical Power Quality and Utilisation, 2009. EPQU 2009. 10th International Conference on, 2009, pp. 1-6.

[38] K. C. Paul, et al., "Predicted results of a HID DC current lamp considering a P-1 radiation model," IEEE transactions on plasma science, vol. 32, pp. 118-126, 2004.

[39] A. Dolara, et al., "Power quality in public lighting systems," in Harmonics and Quality of Power (ICHQP), 2010 14th International Conference on, 2010, pp. 1-7.

[40] G. Zissis, J. Damelincourt, and T. Bezanahary, "Modelling discharge lamps for electronic circuit designers: A review of the existing methods," in Industry Applications Conference, 2001. Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE, 2001, pp. 1260-1262.

[41] J. Koprnický, J. Václavík, and A. Richter, "Electric conductivity model of discharge lamps," Selfreport of the Ph. D. thesis [39] Přispěvatelé Wikipedie, Arc Lamp, 2007.

[42] J. L. T. Fabela, et al., "Electrical model for HPS discharge based on the energy-balance equation," IEEE transactions on plasma science, vol. 35, pp. 637-643, 2007.

[43] C. Blanco, et al., "A discharge lamp model based on lamp dynamic conductance," IEEE transactions on power electronics, vol. 22, pp. 727-734, 2007.

[44] C. B. Viejo, et al., "Comparison between different discharge lamp models based on lamp dynamic conductance," IEEE Transactions on Industry Applications, vol. 47, pp. 1983-1991, 2011.