Optimum placement of capacitor in radial distribution system using PSO algorithm

Ahmadi, Iman and Farazmanesh, Ahoora and Yazdi, Saber (2022): Optimum placement of capacitor in radial distribution system using PSO algorithm.

Abstract

Passing power through transmission and distribution lines causes a loss of some electrical energy in these lines. The amount of these losses is more significant at the distribution level than the losses at the transmission level due to the low voltage level and high currents. According to the Electricity Distribution Company, the losses of this power are the difference between the delivered energy from the upstream and the delivered output energy downstream. If we consider at losses economically, losses are the difference between the energy bought and the energy sold. In other words, losses are equal to costs. The large cost of losses can be shown by an example.

• Item Type: MPRA Paper
• Language: English
• Keywords: Optimum placement of capacitor , distribution network, PSO
• Subjects: O - Economic Development, Innovation, Technological Change, and Growth > O1 - Economic Development > O14 - Industrialization ; Manufacturing and Service Industries ; Choice of Technology; O - Economic Development, Innovation, Technological Change, and Growth > O3 - Innovation ; Research and Development ; Technological Change ; Intellectual Property Rights > O32 - Management of Technological Innovation and R&D; Q - Agricultural and Natural Resource Economics ; Environmental and Ecological Economics > Q3 - Nonrenewable Resources and Conservation > Q32 - Exhaustible Resources and Economic Development

References

[1] R. Srinivasa Rao, K. Ravindra, K. Satish, and S. V. L. Narasimham ,”Power Loss Minimization in Distribution System Using Network Reconfiguration in the Presence of Distributed Generation”, IEEE TRANSACTIONS ON POWER SYSTEMS, VOL. 28, NO. 1, FEBRUARY 2013

[2] Ritu Parasher,” LOAD FLOW ANALYSIS OF RADIAL DISTRIBUTION NETWORK USING LINEAR DATA STRUCTURE”, A Dissertation Submitted in partial fulfillment for the award of the Degree of Master of Technology in Department of Computer Science & Engineering

[3] M. E. Baran and F. F. Wu, “Network reconfiguration in systems for loss reduction and load balancing,” IEEE Trans. Power Del., vol. 4, no.2, pp. 1401–1407, Apr. 1989.

[4] M. Hayerikhiyavi and A. Dimitrovski. " Improved Gyrator-Capacitor Modeling of Magnetic Circuits with Inclusion of Magnetic Hysteresis". 2022 IEEE/PES Transmission and Distribution Conference and Exposition (T&D). IEEE, 2022.

[5] M. Hayerikhiyavi, A. Dimitrovski, “Impact of Different Types of DC Bias Sources on the Effective Impedance of a CVSR”. 2022 IEEE Kansas Power and Energy Conference (KPEC). IEEE, 2022.

[6] M. Hayerikhiyavi, A. Dimitrovski, “Modeling of A Realistic DC Source in A CVSR”. arXiv preprint arXiv:2109.05568 (2021).

[7] M. Hayerikhiyavi and A. Dimitrovski, "Gyrator-Capacitor Modeling of A Continuously Variable Series Reactor in Different Operating Modes," 2021 IEEE Kansas Power and Energy Conference (KPEC), 2021

[8] B. Venkatesh, R. Ranjan, and H. B. Gooi, “Optimal reconfiguration of radial distribution systems to maximize loadability,” IEEE Trans. Power Del., vol. 19, no. 1, pp. 260–266, Feb. 2004.

[9] Yuan-Kang, W., et al., “Study of Reconfiguration for the Distribution System With Distributed Generators”. Power Delivery, IEEE Transactions on, 2010. 25(3): p. 1678-1685.

[10] A.W.Green, J.T.Boys, “Threephase voltage sourced reversible rectifiers, IEEE proc.135(1988)362-370.

[11] H. Akbarpour, M. Akbarpour. "Prediction of punching shear strength of two-way slabs using artificial neural network and adaptive neuro-fuzzy inference system." Neural Computing and Applications 28, no. 11 (2017): 3273-3284.

[12] H. Akbarpour, M. Mohajeri, and M. Akbarpour. "Pore diameter of nanoporous anodic alumina: experimental study and application of ANFIS and MLR." Chemometrics and Intelligent Laboratory Systems 153 (2016): 82-91.

[13] Guo, J., Crow, M.L. and Sarangapani, J., 2009. An improved UPFC control for oscillation damping. IEEE transactions on power systems, 24(1), pp.288-296.

[14] Y. L. Ke, “Distribution feeder reconfiguration for load balancing and service restoration by using G-nets inference mechanism,” IEEE Trans. Power Del., vol. 19, no. 3, pp. 1426–1433, Jul. 2004.

[15] M. Dorigo and L. M. Gambardella, “Ant colony system: A cooperative learning approach to the travelling salesman problem,” IEEE Trans. Evol. Comput., vol. 1, no. 1, pp. 53–66, Apr. 1997.

[16] S. Kirkpatrick, C. D. Gelatto, and M. P. Vecchi, “Optimization by simulated annealing,” Science, vol. 220, no. 4598, pp. 671–680, 1983.

[17] C. Zhang, J. Zhang, and X. Guo, “The application of hybrid genetic particle swarm optimization algorithm in the distribution network reconfigurations multi-objective optimization,” in Proc. 3rd Int. Conf. Natural Computation, 2007, vol. 2, pp. 455–459.