What Drives Innovation?: Inferences from an Industry-Wide Survey in Nigeria

Egbetokun, A and Siyanbola, W and Sanni, M and Olamade, O and Adeniyi, A and Irefin, I (2008): What Drives Innovation?: Inferences from an Industry-Wide Survey in Nigeria. Published in: Int. J. Technology Management , Vol. 45, No. 1-2 (2009): pp. 123-140.

Abstract

This chapter seeks to make some contributions to the literature on firm-level innovation in Africa by attempting to identify the significant factors that explain the capability of firms in Nigeria to innovate using the results of an industry-wide study. We focused on the product and process innovation activities of firms between 2003 and 2006 and found differences in the factors that drive them at the firm level. Our results further show that interactions matter more than most innovation-related variables and that the most important actors that influence a firm’s innovation efforts are its customers and suppliers. We conclude that product and process innovations are not mutually exclusive and that a major key to successful innovation is how and with whom a firm collaborates. The implication of this for firms and policy makers is that an effectively wired innovation system where all stakeholders are active is critical for firm-level innovation capability.

• Item Type: MPRA Paper
• Language: English
• Keywords: innovation; drivers; manufacturing industry; Nigeria; determinants
• Subjects: O - Economic Development, Innovation, Technological Change, and Growth > O3 - Innovation ; Research and Development ; Technological Change ; Intellectual Property Rights > O32 - Management of Technological Innovation and R&D; L - Industrial Organization > L6 - Industry Studies: Manufacturing > L60 - General; L - Industrial Organization > L0 - General > L00 - General

References

Albaladejo, Manuel (2003). Industrial Realities in Nigeria: From Bad to Worse. QEH Working Paper Series –Working Paper Number 101. Queen Elizabeth House, Oxford University, Oxford (available at http://www.qeh.ox.ac.uk/pdf/qehwp/qehwps101.pdf, accessed November 17, 2006).

Albu, Michael (1997). Technological Learning and Innovation in Industrial Clusters in the South. Thesis submitted in partial fulfilment of the requirements for the degree of MSc in Science and Technology Policy. Science Policy Research Unit, University of Sussex. September 1997.

Bala-Subrahmanya, M. H. (2005). 'Technological Innovations in Indian small enterprises: dimensions, intensity and implications', Int. J. Technology Management Vol. 30 Nos 1/2, pp. 188 - 204.

Bala Subrahmanya, M.H. (2006) Technological innovations in Indian Small and Medium Enterprises (SMEs) sector: does firm size matter? International Journal of Innovation and Learning Volume 3, Number 5/2006 pp499 - 517

Bell, M., (1984). Learning and the accumulation of industrial technological capability in developing countries. In: Fransman, M., King, K. (Eds.), Technological Capability in the Third World. Macmillan, London, pp. 187–209.

Biggs, T, Shah, M and Strivastava, P. (1995). ‘Technological Capabilities and Learning in Africa Enterprises’ World Bank Technical Paper No.288 Washington, D.C.

Bureau of Public Enterprises (BPE), (2007). Industry and Manufacturing Background. http://www.bpeng.org/en/companies/Industry+and+Manufacturing/industry_ policy.htm; accessed July, 2007

Cantwell, J. and G. D. Santangelo (2000). “Capitalism, profits and innovation in the new techno-economic paradigm.” Journal of Evolutionary Economics 10: 131–157.

Central Bank of Nigeria (CBN) (2004). Real Sector Statistics In: Nigeria: Major Economic, Financial And Banking Indicators. Nnanna, O.J., Odoko, F.O., Okafor, C.M., Essien, S. N., Akinboyo, O. L. and Zayyad, T. T. (eds.). CBN Research Department

Cohen, W.M., Levinthal, D.A. (1989). Innovation and learning: the two faces of R&D. The Economic Journal 99, 569–596.

Dodgson, M. (1993) ‘Organisational Learning: a Review of Some Literatures’ Organisational studies Vol. 14, No3.

Dodgson, M., D. M. Gann and A. J. Salter (2001). “The intensification of innovation.” SPRU Electronic Working Paper 65. University of Sussex, Science Policy Research Unit. [http://www.sussex.ac.uk/spru].

Edquist, C. (ed.)(1997) Systems of Innovation: Technologies, Institutions and Organizations, London: Pinter/Cassell Academic.

Freeman, C (1995), “The ‘National System of Innovation’ in Historical Perspective”, Cambridge Journal of Economics, Vol. 19, No. 1, pp. 5-24.

Freeman, C., (1991). Networks of innovators: a synthesis of research issues. Research Policy 20, 499–514.

Goedhuys, Micheline, Janz, Norbert and Mohnen, Pierre (2006). What drives productivity in Tanzanian manufacturing firms: technology or institutions? UNU-MERIT Working Paper #2006-37, UNU-MERIT

Håkansson, H. (1989). Corporate Technological Behaviour: Co-operation and Networks. Routledge, London.

Hitt, M., Hoskisson, R., & Nixon, R. (1997). A mid-range theory of interfunctional integration, its antecedents and outcomes. Journal of Engineering and Technology Management, 10, 161-185.

Hitt, M.A., Ireland, R.D., Lee, H. (2000). Technological learning, knowledge management, firm growth and performance: an introductory essay. Journal of Engineering and Technology Management 17 (3/4), 231–246.

Hoffman, K., Parejo, M., Bessant, J., Perren, L. (1998). Small firms, R&D, technology and innovation in the UK: a literature review. Technovation 18 (1), 39–55.

Ilori, M. O., Oke, J. S. and Sanni, S. A. (2000). Management of new product development in selected food companies in Nigeria. Technovation, 20 (2000) pp. 333-342

Jaruzelski, Barry and Dehoff, Kevin (2007). The Customer Connection: The Global Innovation 1000. Booz Allen Hamilton Inc.

Kim, L. and Nelson, R. (eds.) (2000). Technology, Learning and Innovation: Experiences of Newly Industrializing Economies. Cambridge University Press, Cambridge.

Lall S. (1992). Technological capabilities and industrialization. World Development 20(2), 165-186

Leifer, P. R. (1997). Organizational and Managerial Correlates of Radical Technological Innovation in Kocaoglu, D. F. and Anderson T. R. (eds.) Innovation in Technology Management: The Key to Global Leadership. Proceedings of the Portland International Conference on Management of Engineering and Technology (PICMET, ‘97). PICMET, Portland.

Lundvall, Bengt-Ake (1992). National Systems of Innovation. Towards a Theory of Innovation and Interactive Learning. New York. Pinter.

Lundvall, B.-A. (1988). “Innovation as an Interactive Process: From User-Producer Interaction to the National System of Innovation” in Giovanni Dosi, Christopher Freeman, Richard Nelson, Gerald Silverberg and Luc Soete, eds., Technical change and Economic Theory, Pinter Publishers, UK, pp. 349-369.

Malerba, F. (1992). Learning by firms and incremental technical change. The Economic Journal 102, 845–859.

Manufacturers Association of Nigeria (MAN) (2007). MAN Members’ Directory (http://www.manufacturersnigeria.org/) accessed July/August, 2007

Meeus, Marius T.H., Oerlemans, Leon A.G. and van Dijck, Jules J.J. (1999a). Regional systems of innovation from within: An empirical specification of the relation between technological dynamics and interaction between multiple actors in a Dutch region. Eindhoven Centre for Innovation Studies (ECIS) Working Paper 99.1,ECIS, The Netherlands

Meeus, Marius T.H., Oerlemans, Leon A.G. and Hage, Jerald (1999b). Sectoral Patterns of Interactive Learning: An empirical exploration using an extented resource based model. Eindhoven Centre for Innovation Studies (ECIS) Working Paper 99.5, ECIS, The Netherlands

Mytelka, L. (2000). “Local Systems of Innovation in a Globalized World Economy” in Industry and Innovation, Vol. 7, No. 1, June, pp. 33-54.

Organisation for Economic Cooperation and Development (OECD) (2005). Proposed guidelines for collecting and interpreting technological innovation data: Oslo Manual, 3rd ed. OECD. Paris.

Organisation for Economic Cooperation and Development (OECD) (1997). The Second European Report on S&T Indicators (1997). OECD, Paris

Organisation for Economic Cooperation and Development (OECD) (2004). The Economic Impact of ICT: Measurement, Evidence and Implications, OECD, Paris.

Oyebisi, T.O.; M.O. Ilori, and M.L. Nassar (1996). Industry-academic relations: an assessment of the linkages between a university and some enterprises in Nigeria, Technovation, 16 (4) (1996) pp. 203-209.

Oyewale, A. A. (2005). Addressing the research-industry linkage impasse in Nigeria: The critical issues and implementation strategies, Paper presented at Globelics-South Africa, 2005. www.globelics2005africa.org.za/papers/p0032/Globelics2005_Adesina%20Ayobami%20Oyewale.pdf (accessed December 2, 2006).

Panda, H., Ramanathan, K. (1996). Technological capability assessment of a firm in the electricity sector. Technovation 16 (10), 561–588.

Polcuch, E. F., Lugones, G. and Peirano, F. (2005). Innovation in Developing Countries: Characteristics and Measurement Priorities In: Micheline Goedhuys (ed.). Technology Policy Briefs, Vol. 4 Issue 1, 2005. United Nations University, Netherlands.

Raward, Christine (2004). Leading Innovation and Entrepreneurship: An Action Research Study in the Australian Red Meat Industry. Paper prepared for presentation at AGSE-Babson Regional Entrepreneurship and Innovation Exchange, 24-25 February 2004, Melbourne, Australia.

Romijn, H. and Albaladejo, M. (2002). Determinants of innovation capability in small electronics and software firms in southeast England. Research Policy 31 (2002) 1053–1067.

Souitaris, V. (2003). Determinants of technological innovation: Current state of the art, modern research trends and future prospects. In: L. V. Shavinina (Ed.), The International Handbook on Innovation. Elsevier Science, Oxford

Storey, J. (2000). The management of innovation problem. International Journal of Innovation Management, 4 (3), 347-369.

Teixeira, Aurora and Natércia, Fortuna (2003). Human capital, innovation capability and economic growth: Portugal, 1960 – 2001. (FEP) Working Paper no. 131, July 2003. Faculty of Economics, University of Porto, Portugal.

Tidd, J. (2001). Innovation Management in context: Environment, organization and performance. International Journal of Mnangement Reviews, 3 (3), 169-184.

Tyler, Gerald (2002). Public and Private Electricity Provision as a Barrier to Manufacturing Competitiveness in Findings 221 (December 2002) Knowledge and Learning Center on behalf of Africa Region, the World Bank (http://www.worldbank.org/afr/findings, accessed April 2006).

United Nations Conference on Trade and Development (UNCTAD) (2007). The Least Developed Countries Report 2007: Knowledge, Technological Learning and Innovation for Development. United Nations Conference on Trade and Development, Geneva and New York.

-------------- (1996). The TRIPS Agreement and Developing Countries.Geneva.

United Nations Industrial Development Organisation (UNIDO) (2002). Innovative Technology Transfer Framework Linked to Trade for UNIDO Action. UNIDO, Vienna.

United Nations University Institute for New Technologies (UNU-INTECH) (2004). Designing a Policy-Relevant Innovation Survey for NEPAD, A Study prepared by UNU-INTECH, Maastricht, The Netherlands.

Von Hippel, E. (1988). The Sources of Innovation. Oxford University Press, New York.

Wangwe, S. M. (ed.) (1995). Exporting Africa: technology, trade and industrialization in Sub-Saharan Africa. UNU/INTECH, London and New York.

Wignaraja, G. (1998). Trade Policy, Technology and Exports: Sri Lanka’s Liberalisation Experience. Macmillan, London. Zaltman, G., Duncan, R. & Holbek, J. (1973). Innovations and organizations. John Wiley,